the specified file was not found код 2 что делать
The specified file was not found
Помощь в написании контрольных, курсовых и дипломных работ здесь.
file not found
File not found ‘mstcpip.dcu’ что это? подскажите, пожалуйста(
out-file not found
Скачал ассемблер(даже не знаю какой, не разбирабсь ничерта), с ним шли несколько файлов(*.asm), я.
File not found
При запуске отладки возникает ошибка File not found и ссылается на часть кода reset(f); Вот сам.
Вот проект. Только здесь уже динамический массив. показывает 2 ошибки. файл в Debug и называется LR7.DAT.
Заранее огромное спасибо.
Вложения
 | dinam.rar (2.37 Мб, 44 просмотров) |
Вложения
| madina.rar (6.5 Кб, 40 просмотров) |
Добавлено через 2 минуты
А так все правильно работает, но просто нужно с помощью диалогового окна задавать количество записей.
Добавлено через 49 минут
Помощь в написании контрольных, курсовых и дипломных работ здесь.
The specified file was not found
При запуске установки Windows xp Best Edition 2010 вибиваэ ошибку The specified file was not found.
File not found
Здравствуйте! Прошу помощи по работе с файлом. Нужно сохранить (дописать) результат прохождения.
File not found
Добрый день, подскажите пожалуйста в чем может быть проблема: у меня на пк работает макрос в.
VBA File Not Found
Добрый день! Запускаю аксес, на форме есть кнопка при нажатии которой выполняется программа. Я.
Ошибка file not found
Здравствуйте, начал делать курсач и потом забил на него на время, сегодня захожу хочу.
Error 15: File not found
Вчера пытался активировать windows 7, вроде получилось, но после перезагрузки я не смог дойти даже.
WindowsError: [Error 2] The system cannot find the file specified #157
Comments
ssqf commented Jul 9, 2018 •
Temporary solution
Description of problem
BEFORE SUBMITTING, PLEASE SEARCH FOR DUPLICATES IN
Configuration
VSCode: 1.25.0
PIO IDE: v0.17.1
System: Windows_NT, 10.0.16299, x64
Exception
The text was updated successfully, but these errors were encountered:
ivankravets commented Jul 10, 2018
Could you reproduce this issue after restart?
ivankravets commented Aug 3, 2018
Please reopen if you still need help
MkLHX commented Aug 7, 2018 •
Hi!
I have the same error.
The issue is reproduce allways i start VScode. I’have this message : 
When i click on report issue :
ivankravets commented Aug 7, 2018
Please report if it helped.
MkLHX commented Aug 7, 2018 •
I disabled defender and add the folder in defender’s exclusions :
So i get this issue now:
Edit :
seeing the #164 but i can’t use pio or platformio command on VScode
ivankravets commented Aug 7, 2018
Now, just remove this folder C:\Users\drumt\.platformio\packages\contrib-pysite and restart VSCode. It seems that defender totally blocks PlatformIO. Please add to white-list c:\users\YourUserName\.platformio folder
MkLHX commented Aug 7, 2018 •
edit : So it’s OK, i can run pio on VScode
ivankravets commented Aug 7, 2018
brogamma commented Sep 11, 2018 •
Hi, I tried to resolve this issue but even adding the folder C:\Users\drumt\.platformio to the exlusion folder of defender i still get the same error code. Even after following the steps shown above.
edit: added the error code
MkLHX commented Sep 11, 2018
Hello, you need to use your username.
brogamma commented Sep 11, 2018
I used the username in the way you provided but the error keeps existing. I have no clue where the issue may come from.
MkLHX commented Sep 11, 2018
brogamma commented Sep 11, 2018
ivankravets commented Sep 11, 2018
brogamma commented Sep 11, 2018
@ivankravets That helped! Had Python 2.7.1 installed and uninstallig that made the extension work. Thanks for the help!
ivankravets commented Oct 26, 2018
Resolved in the latest release.
You can’t perform that action at this time.
You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.
График по точкам из файла. Ошибка The specified file was not found
Выдаёт ошибку при нажатии на кнопку: The specified file was not found. Файл в директории с проектом.
В результате выполнения программы на Си создаётся файл 1.res со значениями в виде:
10 //число результатов
3 4 5 6 7 8 9 10 11 12 //значение времён
0.00095 0.0009 0.00085 0.0008 0.00075 0.0007 0.00065 0.0006 0.00055 0.0005 //значение плотностей
0.25 //математическое ожидание
0.003 //дисперсия
число значений и значения всегда разные.
Мат.ожидание и дисперсия просто выводятся в Label.
Помощь в написании контрольных, курсовых и дипломных работ здесь.
Вложения
| graph.rar (2.39 Мб, 6 просмотров) |
Ошибка File not found при открытии текстового файла
Здравствуйте! Пытаюсь открыть файл на чтение следующим образом: Sub Mean() Open.
Ошибка «File not found» при сохранении файла
Пишу код програмы нажимаю ctr+f9 чтобы сохранить файл и мне выдаётся ошибка file not found что.
Ошибка file not found
Здравствуйте, начал делать курсач и потом забил на него на время, сегодня захожу хочу.
Ошибка File not found
unit Unit1; interface uses Windows, Messages, SysUtils, Variants, Classes, Graphics.
How to fix FileNotFoundError: [WinError 2] The system cannot find the file specified with AudioSegment.from_mp3()
I’ve been trying to find the position of spaces of audio silence in the audio of a video, but I can’t get past just importing an audio file with pydub in python 3
I’ve already tried changing the directory that pydub is checking for ffmpeg to one within the project, and the file is in the directory I’m running the script from but it still seems to return the same error.
I expect it to store the mp3 audio segment into the variable audi but it returns:
returns as expected
returns as expected
and the code stops running at the point where I try to import audio
3 Answers 3
First part of the answer tries to reproduce OPs error for comparison reason. Thereafter finding a solution via update 1 and finally update 2. The folder-names x, y are used to shorten pathlengths.
Reproducing it threw me the following errors:
The following code is to check if ffmpeg and ffprobe can be found:
Proposed solution:
Include the following specific codeline to specify where the ffmpeg is located:
pydub.AudioSegment.converter = r»C:\\path\\to\\ffmpeg.exe» where path\to\ is the actual path
And you should be fine.
Update 1:
When you run below script the AttributeError: ‘WindowsPath’ object has no attribute ‘read’ error occurs. The error is related to pathlib and should have be been fixed in pydub 0.22 version as discussed here at github. I’ve raised the issue at Github.
Update 2:
As update 1 solves a platform version issue update 2 solves the issue in error one and two at the same time if solution 1 in update 1 doesn’t solve it yet.
Include in your script directly after the import statements the following lines:
The printout shows you whether you have included the location of FFmpeg files or not. If not you need to reboot windows due to the fact the windows environment paths are not updated while you are currently in a python environment/editor.
In my case after reboot c:\y\FFmpeg\ showed up under ‘PATH’ and all warnings in error one and two were gone.
FileNotFoundError: [WinError 2] The system cannot find the file specified #13
Comments
sametdumankaya commented Mar 27, 2019 •
When I try to run the jupyter notebook that you provided on the link
https://github.com/minimaxir/automl-gs/blob/master/docs/automl_gs_tutorial.ipynb
I’m getting FileNotFoundError. Also, when I tried with a local csv file, I got the same error again.
Btw, my OS is Windows 10.
The text was updated successfully, but these errors were encountered:
vjohansen commented Mar 27, 2019
call Popen with cmd: [‘python3’, ‘model.py’, ‘-d’, ‘c:\\temp\\x.csv’, ‘-m’, ‘train’, ‘-c’, ‘automl-gs’]
and then fails possibly due to a missing model.pu
sametdumankaya commented Mar 27, 2019
Yeah, probably. I added the shell=True argument to the Popen statement to see if it works, but it generated another FileNotFoundError.
minimaxir commented Mar 27, 2019
Yes, I admit I did not test on Windows. I thought having os.path everywhere would be enough, but I suppose it’s true the subprocess on Windows is a bit different, or the file path of the generated files is not correct.
Will try to look into.
artu001 commented Mar 27, 2019
same questions,in window system,
drsteveoh commented Mar 28, 2019
Same here. Not a permissions issue, definitely seems like an issue with the path of the created model.py file (maybe?).
evan-burke commented Apr 1, 2019
It’s actually the python executable. Subprocess doesn’t appear to check the PATH, per https://stackoverflow.com/a/32799942/2540707